Efnisyfirlit

• Cover
• Title Page
• Preface
• Approach and Organization
• What’s New in the Global Edition
• Features Retained from Previous Editions
• Supplements and Web Site Material
• Acknowledgments and Commitment to Accuracy
• 1 Electric Circuit Variables
• 1.1 Introduction
• 1.2 Electric Circuits and Current
• 1.3 Systems of Units
• 1.4 Voltage
• 1.5 Power and Energy
• 1.6 Circuit Analysis and Design
• 1.7 How Can We Check …?
• 1.8 Design Example An Instrumentation Circuit
• 1.9 SUMMARY
• PROBLEMS
• Design Problems
• 2 Circuit Elements
• 2.1 Introduction
• 2.2 Engineering and Linear Models
• 2.3 Active and Passive Circuit Elements
• 2.4 Resistors
• 2.5 Independent Sources
• 2.6 Voltmeters and Ammeters
• 2.7 Dependent Sources
• 2.8 Resistive Transducers
• 2.9 Switches
• 2.10 How Can We Check …?
• 2.11 Design Example Temperature Sensor
• 2.12 SUMMARY
• PROBLEMS
• Design Problems
• 3 Resistive Circuits
• 3.1 Introduction
• 3.2 Kirchhoff’s Laws
• 3.3 Series Resistors and Voltage Division
• 3.4 Parallel Resistors and Current Division
• 3.5 Series Voltage Sources and Parallel Current Sources
• 3.6 Circuit Analysis
• 3.7 Analyzing Resistive Circuits Using MATLAB
• 3.8 How Can We Check …?
• 3.9 Design Example Adjustable Voltage Source
• 3.10 SUMMARY
• PROBLEMS
• Design Problems
• 4 Methods of Analysis of Resistive Circuits
• 4.1 Introduction
• 4.2 Node Voltage Analysis of Circuits with Current Sources
• 4.3 Node Voltage Analysis of Circuits with Current and Voltage Sources
• 4.4 Node Voltage Analysis with Dependent Sources
• 4.5 Mesh Current Analysis with Independent Voltage Sources
• 4.6 Mesh Current Analysis with Current and Voltage Sources
• 4.7 Mesh Current Analysis with Dependent Sources
• 4.8 The Node Voltage Method and Mesh Current Method Compared
• 4.9 Circuit Analysis Using MATLAB
• 4.10 Using PSpice to Determine Node Voltages and Mesh Currents
• 4.11 How Can We Check…?
• 4.12 Design Example Potentiometer Angle Display
• 4.13 SUMMARY
• PROBLEMS
• PSpice Problems
• Design Problems
• 5 Circuit Theorems
• 5.1 Introduction
• 5.2 Source Transformations
• 5.3 Superposition
• 5.4 Thévenin’s Theorem
• 5.5 Norton’s Equivalent Circuit
• 5.6 Maximum Power Transfer
• 5.7 Using MATLAB to Determine the Thévenin Equivalent Circuit
• 5.8 Using PSpice to Determine the Thévenin Equivalent Circuit
• 5.9 How Can We Check …?
• 5.10 Design Example Strain Gauge Bridge
• 5.11 SUMMARY
• PROBLEMS
• PSpice Problems
• Design Problems
• 6 The Operational Amplifier
• 6.1 Introduction
• 6.2 The Operational Amplifier
• 6.3 The Ideal Operational Amplifier
• 6.4 Nodal Analysis of Circuits Containing Ideal Operational Amplifiers
• 6.5 Design Using Operational Amplifiers
• 6.6 Operational Amplifier Circuits and Linear Algebraic Equations
• 6.7 Characteristics of Practical Operational Amplifiers
• 6.8 Analysis of Op Amp Circuits Using MATLAB
• 6.9 Using PSpice to Analyze Op Amp Circuits
• 6.10 How Can We Check …?
• 6.11 Design Example Transducer Interface Circuit
• 6.12 SUMMARY
• PROBLEMS
• PSpice Problems
• Design Problems
• 7 Energy Storage Elements
• 7.1 Introduction
• 7.2 Capacitors
• 7.3 Energy Storage in a Capacitor
• 7.4 Series and Parallel Capacitors
• 7.5 Inductors
• 7.6 Energy Storage in an Inductor
• 7.7 Series and Parallel Inductors
• 7.8 Initial Conditions of Switched Circuits
• 7.9 Operational Amplifier Circuits and Linear Differential Equations
• 7.10 Using MATLAB to Plot Capacitor or Inductor Voltage and Current
• 7.11 How Can We Check…?
• 7.12 Design Example Integrator and Switch
• 7.13 SUMMARY
• PROBLEMS
• Design Problems
• 8 The Complete Response of RL and RC Circuits
• 8.1 Introduction
• 8.2 First-Order Circuits
• 8.3 The Response of a First-Order Circuit to a Constant Input
• 8.4 Sequential Switching
• 8.5 Stability of First-Order Circuits
• 8.6 The Unit Step Source
• 8.7 The Response of a First-Order Circuit to a Nonconstant Source
• 8.8 Differential Operators
• 8.9 Using PSpice to Analyze First-Order Circuits
• 8.10 How Can We Check …?
• 8.11 Design Example A Computer and Printer
• 8.12 SUMMARY
• PROBLEMS
• PSpice Problems
• Design Problems
• 9 The Complete Response of Circuits with Two Energy Storage Elements
• 9.1 Introduction
• 9.2 Differential Equation for Circuits with Two Energy Storage Elements
• 9.3 Solution of the Second-Order Differential Equation—The Natural Response
• 9.4 Natural Response of the Unforced Parallel RLC Circuit
• 9.5 Natural Response of the Critically Damped Unforced Parallel RLC Circuit
• 9.6 Natural Response of an Underdamped Unforced Parallel RLC Circuit
• 9.7 Forced Response of an RLC Circuit
• 9.8 Complete Response of an RLC Circuit
• 9.9 State Variable Approach to Circuit Analysis
• 9.10 Roots in the Complex Plane
• 9.11 How Can We Check …?
• 9.12 Design Example Auto Airbag Igniter
• 9.13 SUMMARY
• PROBLEMS
• PSpice Problems
• Design Problems
• 10 Sinusoidal Steady-State Analysis
• 10.1 Introduction
• 10.2 Sinusoidal Sources
• 10.3 Phasors and Sinusoids
• 10.4 Impedances
• 10.5 Series and Parallel Impedances
• 10.6 Mesh and Node Equations
• 10.7 Thévenin and Norton Equivalent Circuits
• 10.8 Superposition
• 10.9 Phasor Diagrams
• 10.10 Op Amps in AC Circuits
• 10.11 The Complete Response
• 10.12 Using MATLAB to Analyze AC Circuits
• 10.13 Using PSpice to Analyze AC Circuits
• 10.14 How Can We Check…?
• 10.15 Design Example An Op Amp Circuit
• 10.16 SUMMARY
• PROBLEMS
• PSpice Problems
• Design Problems
• 11 AC Steady-State Power
• 11.1 Introduction
• 11.2 Electric Power
• 11.3 Instantaneous Power and Average Power
• 11.4 Effective Value of a Periodic Waveform
• 11.5 Complex Power
• 11.6 Power Factor
• 11.7 The Power Superposition Principle
• 11.8 The Maximum Power Transfer Theorem
• 11.9 Coupled Inductors
• 11.10 The Ideal Transformer
• 11.11 How Can We Check …?
• 11.12 Design Example Maximum Power Transfer
• 11.13 SUMMARY
• PROBLEMS
• PSpice Problems
• Design Problems
• 12 Three-Phase Circuits
• 12.1 Introduction
• 12.2 Three-Phase Voltages
• 12.3 The Y-to-Y Circuit
• 12.4 The Δ-Connected Source and Load
• 12.5 The Y-to-Δ Circuit
• 12.6 Balanced Three-Phase Circuits
• 12.7 Instantaneous and Average Power in a Balanced Three-Phase Load
• 12.8 Two-Wattmeter Power Measurement
• 12.9 How Can We Check …?
• 12.10 Design Example Power Factor Correction
• 12.11 SUMMARY
• PROBLEMS
• PSpice Problems
• Design Problems
• 13 Frequency Response
• 13.1 Introduction
• 13.2 Gain, Phase Shift, and the Network Function
• 13.3 Bode Plots
• 13.4 Resonant Circuits
• 13.5 Frequency Response of Op Amp Circuits
• 13.6 Plotting Bode Plots Using MATLAB
• 13.7 Using PSpice to Plot a Frequency Response
• 13.8 How Can We Check …?
• 13.9 Design Example Radio Tuner
• 13.10 SUMMARY
• PROBLEMS
• PSpice Problems
• Design Problems
• 14 The Laplace Transform
• 14.1 Introduction
• 14.2 Laplace Transform
• 14.3 Pulse Inputs
• 14.4 Inverse Laplace Transform
• 14.5 Initial and Final Value Theorems
• 14.6 Solution of Differential Equations Describing a Circuit
• 14.7 Circuit Analysis Using Impedance and Initial Conditions
• 14.8 Transfer Function and Impedance
• 14.9 Convolution
• 14.10 Stability
• 14.11 Partial Fraction Expansion Using MATLAB
• 14.12 How Can We Check…?
• 14.13 Design Example Space Shuttle Cargo Door
• 14.14 SUMMARY
• PROBLEMS
• PSpice Problems
• Design Problems
• 15 Fourier Series and Fourier Transform
• 15.1 Introduction
• 15.2 The Fourier Series
• 15.3 Symmetry of the Function f(t)
• 15.4 Fourier Series of Selected Waveforms
• 15.5 Exponential Form of the Fourier Series
• 15.6 The Fourier Spectrum
• 15.7 Circuits and Fourier Series
• 15.8 Using PSpice to Determine the Fourier Series
• 15.9 The Fourier Transform
• 15.10 Fourier Transform Properties
• 15.11 The Spectrum of Signals
• 15.12 Convolution and Circuit Response
• 15.13 The Fourier Transform and the Laplace Transform
• 15.14 How Can We Check …?
• 15.15 Design Example DC Power Supply
• 15.16 SUMMARY
• PROBLEMS
• PSpice Problems
• Design Problems
• 16 Filter Circuits
• 16.1 Introduction
• 16.2 The Electric Filter
• 16.3 Filters
• 16.4 Second-Order Filters
• 16.5 High-Order Filters
• 16.6 Simulating Filter Circuits Using PSpice
• 16.7 How Can We Check …?
• 16.8 Design Example Anti-Aliasing Filter
• 16.9 SUMMARY
• PROBLEMS
• PSpice Problems
• Design Problems
• 17 Two-Port and Three-Port Networks
• 17.1 Introduction
• 17.2 T-to- Transformation and Two-Port Three-Terminal Networks
• 17.3 Equations of Two-Port Networks
• 17.4 Z and Y Parameters for a Circuit with Dependent Sources
• 17.5 Hybrid and Transmission Parameters
• 17.6 Relationships Between Two-Port Parameters
• 17.7 Interconnection of Two-Port Networks
• 17.8 How Can We Check …?
• 17.9 Design Example Transistor Amplifier
• 17.10 SUMMARY
• PROBLEMS
• Design Problems
• Appendix A: Getting Started with PSpice
• A.1 PSpice
• A.2 Getting Started
• A.3 Drawing a Circuit in the ORCAD Capture Workspace
• A.4 Specifying and Running the Simulation
• Appendix B: MATLAB, Matrices, and Complex Arithmetic
• B.1 Using MATLAB as a Calculator
• B.2 Matrices, Determinants, and Simultaneous Equations
• B.3 Complex Numbers and Complex Arithmetic
• B.4 Plotting Functions Using MATLAB
• Appendix C: Mathematical Formulas
• C.1 Trigonometric Identities
• C.2 Derivatives
• C.3 Indefinite Integrals
• Appendix D: Resistor Specifications and Monte Carlo Analysis
• References
• Index
• End User License Agreement