Efnisyfirlit

• Table of contents
• Preface
• Metallic materials and applications
• Effect of the cooling rate and final cooling temperature on the microstructure of GCr15 bearing stee
• Effect of different flakiness ratios of two-liquid bimetal casting on the technology and microstruct
• Comprehensive research of carbide indexable toll edge cutting simulation
• Microstructure of plasma surface iron alloy coating reinforced by pre-coated SiCp
• Characterization of Al-Mn particles in Mg-6Al-xMn magnesium alloys
• Structure, hydrogen storage properties and thermal stability of Mg90 (RE0.25Ni0.75)10 alloys
• Precipitation behavior of MnS inclusion for high-speed wheel steel during the solidification process
• Mechanism research on the formation and control of MnS inclusion in heavy rail steel
• Methodology of the fatigue test for the partial component of the railway vehicle’s carbody
• Iron slag as a flame retardant for flexible Poly(Vinyl Chloride)
• Research on dissimilar metal fusion welding-brazing of titanium alloy and aluminum alloy
• Analyzing the structure strength of tracked vehicles’ wheel box based on the virtual prototyping t
• Characterization of precipitate phases in a Mg-Gd-Y-Nd-Zr alloy
• Molecular dynamics simulation of the crack propagation of aluminum with void under various condition
• Effects of the ytterbium modification on the microstructure and mechanical properties of the Mg-3Al-
• Surface characteristics of TiN, TiAlN and AlCrN coated tungsten carbide
• Influence of V and N addition on the microstructure and properties of low-alloy steel containing 1%
• Effect of heat treatment on the banded structure of a hot-rolled 30CrMo steel
• Effect of Ti content on microstructures and Charpy impact properties in the Coarse-Grained Heat-Affe
• Adsorption kinetics of soil-exchangeable Zn and Mn by Fe–Al binary oxide
• Effect of sand-blasted treatment on the oxidation resistance of TP347 stainless steel in high-temper
• Investigation on the magnetic properties of heat-resistant steels and oxides
• Chemical materials
• High-performance UV-cure polyurethane acrylate for UV transparent insulation inks
• Fluorescence reabsorption analysis on the laser cooling of Er3+-doped fluoroindate glass
• The first-principle study of structures and properties of Cun+1, PbCun (n = 1∼8) clusters
• Research on the influence of species and diameters of the filler on the thermal conductivities of si
• Double functional polystyrene beads
• Preparation of quaternized cationic waterborne polyurethane and its fixative performance on reactive
• Effect of unvulcanized polar graft-modified rubbers on mechanical and thermal properties of Polyprop
• Properties of medical grade Polypropylene and its as-spun filament
• Phenolic Foam modified with butadiene-acrylonitrile rubber as a toughening agent
• Study on the main affecting factors of the fire-retardant retention on the bamboo bundles of a fire-
• Electrochemical properties of rod-like liquid crystalline molecules based on aromatic aldehyde
• Synthesis and crystal structure of ethyl 2-(salicylylideneamino)-4,5,6,7-tetrahydrobenzo[b] thiophen
• Magnesium olivine sand as a flame retardant for flexible Poly(Vinyl Chloride)
• Preparation of a non-ionic polyacrylamide-grafted starch flocculant and its application in the treat
• Preparation of a cationic polyacrylamide-grafted starch flocculant and its application
• Epoxy resins treated with manganese-containing compounds
• Chitosan/polyvinylpyrrolidone hydrogels for cimetidine release
• Preparation and characterization of a novel desulfurizer, Co3O4/γ-Al2O3-attapulgite, and its optimi
• Electronic materials
• Electronic and optical properties of quasi-2D BCN2
• Magnetic effect on electron spin with both hyperfine interaction and spin-orbit coupling
• Enhanced performance of HIZO Thin-Film Transistors by using a high-κ HfTaO gate dielectric
• Cathodoluminescence and photoluminescence properties of Eu-doped Ba3Si6O12N2 green phosphors by micr
• Influence of Mn doping on dielectric loss of La/Ca Co-doped BaTiO3 ceramic with dielectric-temperatu
• Electronic structure and power factor of NaxCoO2 from first-principles calculation
• Electrodeposition of nickel under the conditions of applied magnetic field and no forced-convection
• Synthesis and characterization of core-shell ion-imprinted polymers by the surface imprinting techno
• Low electrolyte dyeing technology with reactive dyes
• Photon-assistant transport properties of coupled Quantum Dots
• Research on a new oxide-scale detection technique based on magnetic induction
• Nanomaterials
• Effective properties prediction of Carbon Nanotubes reinforced nanomaterials
• Ion-implanted Au nanoparticles for encoding information in light
• Cooperative buckling of parallel nanowires on elastomeric substrates
• Improvement of the field emission properties of post-annealed ZnO nanorod arrays by chemical bath de
• Synthesis and structural characterization of a nanotube potassium titanate anode material for lithiu
• The fabrication of the InP nanoporous structure and the optical property of sulfur-passivated InP
• Photoluminescence analysis of ZnO microrods grown by the hydrothermal method
• Composite and polymer materials
• Study on the preparation and characteristics of HDPE/dialdehyde starch composites
• Effect of silicon on the microstructure and properties of Sip/ZA40 composite materials
• Preparation and mechanical properties of PP/morphology of CaCO3 composites
• Dynamic Mechanical Analysis of PP composites modified by CaCO3 with different morphologies
• Improving the toughness properties of CFRP composites by Aramid Nonwoven Fabric
• Anisotropic thermal expansion behaviors of Al18B4O33 whisker-reinforced aluminum matrix composites
• Effect of SnO2 coating content on the microstructure of Al18B4O33w/6061Al composite extruded at 350
• Effect of an enclosed cage structure on the polymer chain characteristics of Ope-POSS/PU hybrid comp
• Experimental and numerical study of single-sided scarf-repaired composite honeycomb sandwich structu
• Differences in influences of fumed silica and a kind of “cage-like silica” on properties of poly
• Influence of Vacuum Ultraviolet radiation on the mass loss of polymer materials
• Bio and medical materials
• The progress of vegetable oil-based lubricants
• Numerical simulation and analysis of heat and mass transfer process in hot air drying of agricultura
• The establishment of HPLC analysis method of 4-chloro-4’fluorobutyrophenone
• Study on the optimization of the fermentation process by lactic acid bacteria in jelly fish
• Experimental study on the biomechanical behavior of the expanding ring for treating glaucoma
• Functional and ceramic materials
• Visible-light refraction going from negative to positive in Au/TiO2/Au multilayered structures
• Influence of the pore types of mesoporous SiO2 on material removal during CMP by molecular dynamics
• Study on the tribological characteristics of Si3N4-hBN ceramic materials sliding against cast iron
• Analysis of packer rubber aging properties
• Colorimetric analysis of green jadeite
• Synthesis of AlON powders by the hydrothermal method following by SPS calcination
• Environmental materials
• Effective removal of copper (II) ions from the solution using the carbonization of Pomelo Peel as th
• Analysis of financial management environment in new materials enterprises
• Eco-friendly and cost-effective biodegradable films prepared via compounding polyester with thermopl
• Experimental study of direct flocculation for the oil removal of waste water in ship tanks
• Building material and interior design
• Analysis on the methods and changes of the interior space design of express inns
• Properties of plant-based asphalt cement-stabilized fine-grained soil
• Influences of concrete mechanical properties when using zeolite powder as admixture
• The effect of pH value on the measuring accuracy of the bundled chloride ion selective electrodes fo
• The effects of graphite on the mechanical and thermal properties of cement pastes
• Research on the preparation and properties of foamed cement with metakaolin
• Deformation tracking method of asphalt mixture particles based on cross-calibration
• Discussion on the development and application of new environmental protection building materials
• A new type of filter wall
• Fiber material
• Adsorption of Pb(II) from aqueous solutions by immobilized persimmon tannins on collagen fiber
• Thermal stability of cotton cellulose modified with terbium complexes
• Identification of textile fiber components using Thermo-Gravimetric Analysis
• Effect of card taker-in speed on fiber length in flat strips
• Inter-ONU backup fiber based protection for Passive Optical Network against multiple link failures
• A real-time current measuring system for fibers and textiles based on LabVIEW
• Thermal degradation of cotton cellulose modified with magnesium complexes
• Degumming and dissolving of Antheraea yamamai silk fibroin
• Effects of fractured cell-walls on the creep of low density open-cell foams
• BFRP-based FBG strain sensor
• Thermogravimetric analysis on the combustion of hemicellulose, cellulose and lignin
• Dyeing of silk/nylon blend with heterobifunctional reactive dyes in one bath
• Mechanical property of materials
• Moisture sorption isotherm and thermodynamic property of Litopenaeus vannamei
• The effect of Carbon Black on dynamic mechanical properties of Nitrile Butadiene Rubber vulcanizates
• Numerical simulation and lift loss assessment for a scaled S/VTOL aircraft proximity of the ground
• The synthesis of the amidosilane-based surfactants and the investigation of their surface tension
• Airflow analysis of the web cleaner with one fully closed end
• Research of different clamping modes on stretch forming twisted part
• The influence of friction coefficient on forming results in Multi-Gripper Flexible Stretch Forming
• Mechanical engineering and manufacturing technology
• The influence of delay time on the dynamic characteristics of milling system
• Research on the screw machine for the teaching aid
• Research on the vibration-damping technology of some underwater vehicle
• Research on the dynamic characteristics of hydraulic shock absorber
• The diagnosis of fuel injection quantity through the fuel pressure sensor of the common rail in dies
• Novel friendly hydrophobic-associated hydrogel AM-co-AEO-AC: Particular behavior and extraordinary m
• Optimization design for the driving shaft of walking beam cooling bed transmission system
• The design and analysis of the whole drilling rig moved device
• Effect of parameters on flying wing UAV buzz responses
• Determination method for rutting specimen cross-section deformation curve based on line-structured l
• Virtual prototype simulation of a hybrid quad-rotor aircraft based on RecurDyn and Simulink
• Experimental study on the micro-channel coil heat transfer performance of the current air-cooled scr
• Effects of the production process on the properties of inorganic non-metallic material
• Other engineering topics
• Evacuation strategy and simulation study of urban rail transit emergencies
• Study on emergency evacuation strategies for unexpected large passenger flow in urban rail transit s
• Research on the evaluation and selection of the returned logistics operation model of iron and steel
• Research on the evaluation index system of the comprehensive competitiveness of coal mine projects u
• Double image encryption based on multiple-parameter fractional Fourier transform
• An information service model based on “Cloud plus Terminal” for agriculture extension
• The study of urban road intersection safety evaluation method based on the PPC model
• Back Cover